An ingenious member from the gsxf group called Jim has done something that alot of us 750 kat owners had wanted to do for a long time, fit a rear hugger. Now seeing as nobody makes a hugger for this beast Jim had to find a suitable doner then commit wonton acts of violence to said doner to enable it to fit. The doner part is from a GSF600 Bandit costing him £50. Below are some pictures shown with Jim's permission & some text to try & fill in the gaps. If you have any questions you can mail Jim HERE


Cut out shaded area


View of cut out area


Cut out shaded area


View of cut out area


View from the right



View from the left



View of caliper area





Tempory fixing with cableties until bracket can be made



The finished article


Follow this link for a more detailed description of how to do this modification HERE


          

Disclaimer I offer information on this site as a friendly service to fellow riders.  I do not claim to be an expert or to have necessarily written a page so perfect that you could not make a mistake while following its directions.  I have made my best attempts to provide correct information with the factory service manual, my own experiences, and the experiences of the GSXF Mail Group subscribers as resources.  Never-the-less, I cannot be responsible for injury to you or damages to your motorcycle, tools, or equipment, nor for other consequential or incidental damage or injury that may occur while you use the information on these pages.  Responsibility for these occurrences must be solely and completely that of the person who performs the maintenance service.



If you cannot see any frames click here!